回答“One of the buttons (large cup) is broken, is this repairable?”Here ya go man,, don't listen to the first guy that says crap, I recently replaced the left side ashtray arm in my 86 jeep. If you look you can find the right screw for a drill handle made in 1976. That guy is just lazy or dumb https://www.ebay.com/itm/Keurig-B60-B70-K60-K70-OEM-LCD-Control-Buttons-with-Springs-Replacement-Parts-/384158856857?_trksid=p2349624.m46890.l4...
回答“I think I need to replace the waterpump on my keurig65”I replace all my lone, well almost with home depot/lowes 5/16 ID hose, and 4” White zip ties TIGHT AS !&&*, and no more leaks, im not taking the case off again but ill pop the top off real quick (2 screws, takes 5 seconds)
回答“Not brewing and turns off”With it plugged in and turned off(so only the faded menu is visible) press small and medium buttons together and release. Immediately press and release menu 3 times…may take a few tries, it will light up..press menu a few times till it says descale, press one more time.it should say menu again.then WHILE HOLDING medium button, VLICK MENU THEN VLICK SMALL.RELEASE MEDIUM. It will put it in a continuous brew cycle, let it run and keep adding water/switching cups, do this for 5 minutes or so. Then press menu once more, it will make a different noise and begin to empty the internal reservoir. It will keep running after it spits. .let it run a minute (15-30 seconfs) and hit menu again.dhe should shut down…power on. Remove water reservoir while on, unplug..wait 10 minutes plug in turn on, replace tank… cycle a brew, hope that helps!