Donald

I have fitted a replacement screen to my Samsung J3 2016, although the Home Button seems loose and moves quite a bit. It...

Hi, I can’t seem to configure the Time & Date on my iPhone 5C. My SIM is working fine and I get full signal, although when...

My iPhone 6S constantly has no service and I have run out of ideas to fix it. I have tried a different sim, I have...

Hi, my adhesive strips have broken on my iPhone. I have been told that using some Acetone is a good way to dissolve the...

I have a 6S+ with a damaged camera and a working 6S Camera. Will the 6S Camera work in the 6S + ?

Hi John, Unfortunately as far as i’m aware, that isn’t possible as you need to unlock your Phone. The best way to get your DATA may be remove the back panel and attach a new screen so that your able to unlock your device. That is of course if it is only the Screen that is causing your issue.

Hi if you have a Windows 7 Boot Disc or USB then you can reset your Password by using the utilman.exe trick. Here is a link to a website with a guide to show you what to do. It’s straight forward and you can reset your password in minutes using CMD. https://www.technibble.com/bypass-windows-logons-utilman/

Replacing the screen will not Brick the iPhone, although the 8/8Plus & iPhone X all have an issue with the Ambient Sensor when a new screen is fitted. Although a way around this is to use a EEPROM device to copy the firmware from the original screen. It is also rumored that Apple are fixing the Ambient Sensor issue in iOS 12.

I have completed the screen repair, although now the iPhone takes minutes to boot up and then keeps freezing when trying to use it. I have connected the old screen just in case it’s the new screen that’s the issue although it still appears to be the same. Also now when I connect the camera flex at the top the iPhone just boot loops. I have also tried a new Camera flex with the same result. Can anyone help with either of these problems?