EasyAsABC123

fahrenheit not celcius.

try clipping the pins adding new solder to the joints…and then pulling the pins out with pliers while heating from the other side…these are through hole and might take more heat than you are used to. you might need a 700W soldering iron to remove them…clipping them off at the board will show you specifically which ones you haven’t desoldered though.

it says potentiometers everywhere i don’t know why it had directional resistors

A TR8 is what you are referring to

Not that i’m aware of, there are plenty of people you can ship your board to with what you want done to it though.

I have this video which is of a normal xbox controller, i have a desolder gun though so it probably won’t be super beneficial.

https://www.youtube.com/watch?v=OyI_1AxP...

Awesome I'm glad you had success!

0805 SMD LED Diode Lights

i bought these https://www.amazon.com/gp/product/B01CUG...

the standard and elite controller share the same potentiometers, so do the xbox 360 controllers if i’m recalling right.

They are all cheap, they don’t put high quality pots in these controllers…the cheapest are normally just not tested as well meaning they might not be perfect out of the box

the standard and elite controller share the same potentiometers, so do the xbox 360 controllers if i’m recalling right.