回答“How to remove plastic shaft cap of the 800CPXL?”There are two switches in the citrus press. You can dismantle the press by unscrewing the two screws to take away the cap, followed by unscrewing three recessed screws. After this there are two options to dismantle the rest. Take off the top or the bottom. There are two switches in the citrus press, and the broken microswitch is probably located at the top, so you have to take off the top part. Don’t unscrew the handle and the bar-mechanism, but slowly take the top off. After this you need a soldering iron, hot-glue gun and heat-shrinking tubing while replacing the switch. The switch is probable placed in between snapfits, and glued with hot-glue. Good luck Update (02/28/2021): PS: Martin, i have the Solis 845 juicer which looks a lot like yours, I could remove the plastic cap very easily just by pulling it off Step 1: remove the cord holder placed at the bottom Step 2: remove the three recessed screws loosening the bottom and top part from the center piece step 3: pull off the plastic holder: step 4: take...