Hallo Pero Ist der Strich auch vorhanden wenn du einen externen Bildschirm anhängst? Wenn Ja dann ist das Problem bei der Grafikkarte. Diese wird bei diesem Gerät On-Board sein. Das heisst dass du das komplette Mainboard tauschen musst. Wenn der Strich nicht auf dem externen Bildschirm erscheint dann ist das Display-Panel defekt. Das ist die wahrscheinlichere Variante. Bei solchen Fehlern lohnt es sich die interne Verkabelung zu kontrollieren. Ev. ist der Display Stecker nicht korrekt auf dem Mainboard eingesteckt. Diesen findest du wenn du das Notebook öffnest und von den Scharnieren die den Bildschirm halten einem meist schwarzen dikeren Kabel folgst. Wenn auch die Kabel alle korrekt eingesteckt sind müsste man das Display-Panel austauschen. Gruss DonFibo
Is the wireless Adapter active? you can see that (if you use Windows, at Control Center under Device Manager) if it is deaktivated make a right click on it and click aktivate. If you use another Operation System please let us know.
Hy Try this sites: http://www.laptopinventory.com/Laptop_Mo... http://www.newegg.com/Product/Product.as...5 You may have to get your serialnumber to find the right fan. Daniel
hy. It just is a guess, but it seems that the connection to the Display broke or the display itself broke. the Laptop dont recognyse any Showing Peripherie,. This indicates that the Display is not attached or ist answering some inquire from the Computer itselfs. Do you opend a MacBook before? i would recoment to check the Cable to the display and have a look at the Display itselfs. An external Monitor shows all so the Graphikchip still works. it just have nothing to show on. hope i could you help a little bit. Daniel
Hy. Some Questions first. Are both RAM DIMM the same? Maybe one is another protokoll (DDR3, DDR4,...) or they have different Mhz. Please check this. After that switch the RAM in the Sockets. put the one into the other and try again. It is also possible that, when your Laptop fell down, one of the DIMM Sockets got brocken. Check the pins from the DIMM Socket, probably you have to take out the Systemboard. Hope we will get some information out that checks. Daniel
Hallo Karli Ist bei dem Einschaltknopf irgend ein Wackeln oder sonst ein Komisches Gefühl beim Drücken? Macht der Drucker irgendwelche Geräusche oder Blinkt er beim betätigen des Einschaltknopfes? Hat er einen Hauptschalter und einen Standbyknopf (Hauptschalter meistens beim Stromkabel)? Gruss Daniel
Hy First a cuple of questions. Is the Batterie fully charged? does it happens even if you are plugged in with an AC Adapter? does the LED show som special blinking (like 5 times or so)? What happens before that problem showed up? did you install something special or did the laptop get a hit or something? Greez Daniel