Black+Decker LI2000 Repair

The Black and Decker LI2000 is a compact rechargeable handheld power screwdriver released in February 2011. It comes with a charger.

It has two modes, power and hand/manual mode, where you can use the screwdriver as if it were a traditional screwdriver. There are three pivot positions for the drill to operate for whatever angle you are working with the drill on your project.

The screwdriver comes with two Hex Shank screwdriver bits and a charger. Additional bits can be used as long as the bits are the same size/diameter as the ones that came with the drill bit, these are 1/4 inch bits. Just be sure the bits are long enough that they stick out of the bit well at the front of the drill, if not they could easily become stuck inside of the well.

The body is made of black and orange plastic. A sliding direction selector is located on the top instead of a trigger. A position selection button is located at the midpoint of the screwdriver, and a mode selector is positioned at the end of the drill where the bits attach. The model number LI2000 is printed on a black label on the underside of the screwdriver.

• Black and Decker Product Page
• Official Black and Decker Instruction Manual
• Black and Decker LI2000 on Amazon