- Replace, Reattach, and Reclamp the heat sinks on your Xbox 360.
- Usually fixes a RRoD Xbox—also effective as a preventative measure.
- Designed by our savvy Teardown Techs.
- For a higher rate of success, use a Heat Gun to reflow the motherboard's solder joints.
- Tube of Céramique 2 thermal compound (by Arctic Silver)
- Screw and washer hardware pack
- Thermal pads and heatsinks
- Spudger
- Case Opening Tool for the Xbox 360
- Small flathead driver
- 1/4" driver handle with large flathead screwdriver bit
- T8 and T10 Torx drivers
- Xbox 360 Consoles
- Excluding 360 E and 360 S
Xbox 360
|
Falcon |
Jasper |
Opus |
Xenon |
Zephyr |
|