修复你的物品 社区 商店

更换Steam Deck的后盖

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的33本指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
Steam Deck Back Cover Replacement, Prepare your Steam Deck for disassembly: 步骤 0 中的图像 1，3 Steam Deck Back Cover Replacement, Prepare your Steam Deck for disassembly: 步骤 0 中的图像 2，3 Steam Deck Back Cover Replacement, Prepare your Steam Deck for disassembly: 步骤 0 中的图像 3，3
Prepare your Steam Deck for disassembly

  • Turn on your Steam Deck and allow the battery to discharge below 25% before starting your repairs, as a charged lithium-ion polymer battery can be dangerous if accidentally punctured.

  • As an extra precaution, Valve recommends putting your Steam Deck into battery storage mode within the BIOS before starting any internal repairs. Read how to do that here.

  • Power down your Steam Deck and unplug any cables.

  • If you have a microSD card installed, make sure to remove it before opening the Steam Deck. If you attempt to remove the back cover with it still installed, it could snap right in half.

  • During your repair, it can be helpful at times to lay the Steam Deck face-down into its case to protect the thumbsticks and prevent wobble.

为拆解Steam Deck作准备

在开始维修之前，让您的 Steam Deck 开机并让电池放电至 25% 以下，因为电力充足的锂离子电池如果被意外刺破会很危险。

作为额外的预防措施，Valve 建议在开始任何内部维修之前，将您的 Steam Deck 在 BIOS 中设置为电池存储模式。 在此处阅读如何操作。

关闭您的 Steam Deck 并拔下所有线缆。

如果您安装了 microSD 卡，请确保在打开 Steam Deck 之前将其移除。 如果您尝试在后盖仍然安装的情况下卸下后盖，它可能会裂成两半。

在维修过程中，有时将 Steam Deck 面朝下放入其外壳中以保护操纵杆并防止摇晃会很有帮助。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。