跳转到主内容

iPhone XS ディスプレイアセンブリの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
日语

正翻译步骤 5

步骤 5
iPhone XS Display Assembly Replacement: 步骤 0 中的图像 1,2 iPhone XS Display Assembly Replacement: 步骤 0 中的图像 2,2
  • Use a spudger or a fingernail to disconnect the OLED panel cable connector.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

スパッジャーもしくは指先の爪を使って、OLEDパネルケーブルのコネクタの接続を外します。

このようなプレスコネクタを再装着する際は、所定の位置にコネクタの一辺を合わせてカチッと音がするまで押し込み、反対側も同じ作業を繰り返します。 コネクタ中央を押さないでください。 装着位置がずれていると、ピンが曲がってしまい、恒久的な損傷を引き起こす可能性があります。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利