跳转到主内容

iPhone XS ディスプレイアセンブリの交換

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
日语

正翻译步骤 6

步骤 6
iPhone XS Display Assembly Replacement: 步骤 0 中的图像 1,2 iPhone XS Display Assembly Replacement: 步骤 0 中的图像 2,2
  • Use a spudger or fingernail to pry the digitizer cable connector up from its socket.

  • This connector's recessed location makes it tricky to reconnect. Take your time and align it carefully, then gently press it into place with your fingertip—first one side, then the other. You should feel it click into place.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

スパッジャーもしくは指先の爪を使って、ソケットからデジタイザケーブルのコネクタの接続を外します。

このコネクタは凹んだ位置に装着されており、再接続は難しい作業です。 時間をかけてゆっくりと位置を揃えて、指先でコネクタの一方をゆっくり押し込み、もう反対側も押してください。 上から触って固定されたかどうか判断できるはずです。

修理後に画面の一部が反応しない場合は、一旦バッテリーを外してから、このコネクターを再装着してください。カチッと音がしたか、ソケットに埃やその他異物が挟まっていないか確認します。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利