跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
As always, we disconnect the battery first to prevent electrifying anything, including ourselves, as we dig deeper.
  • As always, we disconnect the battery first to prevent electrifying anything, including ourselves, as we dig deeper.

  • Three Phillips #000 screws and a metal bracket hold the battery connector to the logic board.

  • Hmm, this is beginning to feel very familiar.

  • In the 3GS, the display assembly was easy to take out, but the battery was a pain. In the 4 and 4S, the display assembly took 38 steps to remove, while the battery was a breeze. We like to think that Apple has started tailoring to our preferences in allowing us to remove both the display assembly and the battery in only a couple of steps.

和往常一样,在继续拆解之前,我们首先断开电池,以防止任何东西带电,包括我们自己。

3颗Phillips #000号螺丝和金属支架将电池排线固定在主板上。

嗯,开始觉得很熟悉了。

3GS中,屏幕很容易取出,但电池很麻烦。在4和4s中,屏幕拆除用了38个步骤,而电池很容易取出。我们倾向于认为,苹果已经开始根据我们的喜好进行调整,允许我们在短短几步内拆卸屏幕和电池。

在开源创作共享许可协议下,你的投稿已被许可