菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

用稳定、持续的力量拉起吸盘，使前面板和后壳之间产生一个微小的缝隙。

用一个三角拨片插入缝隙。

用于固定显示屏的防水粘合剂非常牢固； 完成这个步骤可能需要很大的力量。 如果您很难打开一个缝隙，应该对其实施进一步的加热，并上下轻轻摇动屏幕，以削弱粘合剂的强度，直到您能够打开一个足够大的缝隙来插入您的工具。

在开源创作共享许可协议下，你的投稿已被许可。