修复你的物品 社区 商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的25指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 2

步骤 2
Apply a suction cup to the lower half of the front panel, just above the home button. Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.
Separate the display

  • Apply a suction cup to the lower half of the front panel, just above the home button.

  • Be sure the suction cup does not overlap with the home button, as this will prevent a seal from forming between the suction cup and front glass.

  • If your display is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken screen.

分离屏幕

将吸盘放在前面板的下半部分，刚好放在home按键的上方。

确保吸盘不会与home按键重叠，因为这将导致吸盘和前面板玻璃之间不能形成密封。

如果你的屏幕已经严重破碎，可先在屏幕上粘上一层透明宽胶带，使吸盘能顺利吸附在显示屏上。你也可以直接选用粘附力极强的胶带，来替代吸盘。如果以上两种办法都不行，你还可以在吸盘上涂上强力胶，使吸盘粘在碎屏上。

在开源创作共享许可协议下，你的投稿已被许可。