跳转到主内容

简介

This guide shows how to remove the SIM card tray to replace the network SIM card for the iPhone 8.

  1. Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray. Press to eject the tray.
    • Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.

    • Press to eject the tray.

    • This may require a significant amount of force. However, ensure the eject tool is properly aligned beforehand as to not damage the eject mechanism inside the phone.

  2. Remove the SIM card tray from the iPhone. The SIM card will fall out of the tray easily.
    • Remove the SIM card tray from the iPhone.

    • The SIM card will fall out of the tray easily.

    • When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.

    • A thin rubber gasket around the SIM card tray provides water and dust protection. If this gasket is damaged or missing, replace the gasket or the entire SIM card tray to protect your iPhone's internal components.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Arthur Shi

于2018年01月03日注册

189,213 信誉积分

创作了432篇指南

团队

iFixit iFixit 的会员

Community

146 名成员

创作了17,275篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 36

过去的7天: 362

过去的30天: 1,494

总计 34,921