跳转到主内容

简介

This guide shows how to safely use iFixit’s adhesive remover.

  1. iFixit adhesive remover contains acetone, a mild skin and eye irritant. Wear eye protection when handling and applying the adhesive remover. (Eye protection is included in your kit.)
    • iFixit adhesive remover contains acetone, a mild skin and eye irritant.

    • Wear eye protection when handling and applying the adhesive remover. (Eye protection is included in your kit.)

    • Do not wear contact lenses without eye protection.

    • Protective gloves are also included in your kit. If you are concerned about possible skin irritation, put your gloves on now.

  2. Pull off the black rubber stopper from your bottle of adhesive remover. Twist to loosen or remove the bottle cap before you cut the applicator tip. This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.
    • Pull off the black rubber stopper from your bottle of adhesive remover.

    • Twist to loosen or remove the bottle cap before you cut the applicator tip.

    • This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.

    • Use scissors to cut off the sealed tip of the applicator.

    • Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.

    • Twist and close the bottle cap securely before you proceed further.

终点

3等其他人完成本指南。

Arthur Shi

于2018年01月03日注册

188,692 信誉积分

创作了432篇指南

团队

iFixit iFixit 的会员

Community

146 名成员

创作了17,094篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 18

过去的7天: 76

过去的30天: 366

总计 4,033