跳转到主内容

iPod Nano 第二代外壳组件更换

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 11

步骤 11
iPod Nano 2nd Generation Case Assembly Replacement: 步骤 0 中的图像 1,1
  • Use a spudger to disconnect the headphone jack cable from the logic board. You need to gently pry the connector toward (or up, if you like, the connector is like LEGO® building blocks) the front of the iPod until it comes loose from the logic board.

  • Special hint for the reassembly: Push the connector inside until it is over the corresponding connector of the logic board. Then insert a thin tool over the connector and push it down onto the logic boards connector.

使用撬棒将耳机插孔排线从主板上断开。 您需要将排线插口轻轻地朝 iPod 正面(或向上,拆排线口的感觉就像拆乐高积木)撬开,直到它从主板上松动。

重新组装的特别提示:将排线扣推入内部,直到它超过主板上的插口。 然后在排线扣上插入一个薄的工具并将其向下推到主板插口上。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利