翻译步骤＃12 - iPod Nano 2nd Generation Case Assembly Replacement - iFixit

取消

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。

英语

中文

上一步下一步

正翻译步骤 12

步骤 12

Use a spudger to push the logic board through the iPod out of the casing. The click wheel and headphone jack should remain in the iPod.

Use a spudger to push the logic board through the iPod out of the casing. The click wheel and headphone jack should remain in the iPod.
Be careful not to catch the headphone jack and click wheel on the logic board as you remove the logic board and display.

在开源创作共享许可协议下，你的投稿已被许可。