iPhone 6 plus 电池更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

英语

中文

上一步

正翻译步骤 6

步骤 6

Remove the battery from the iPhone.
If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the the ribbon cable.
If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
Adhere the battery, disconnect it, and continue reassembling your device.
If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.
Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

	[* black] Remove the battery from the iPhone.
	[* icon_note] If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the the ribbon cable.
-	[* icon_reminder] When installing the battery, refer to [guide\|56465\|this guide] to replace your battery's adhesive strips.
+	[* icon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
+	[* icon_reminder] Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
+	[* black] Adhere the battery, disconnect it, and continue reassembling your device.
+	[* icon_reminder] If your new battery doesn’t have adhesive preinstalled, refer to [guide\|56465\|this guide] to replace the adhesive strips.
	[* icon_reminder] Perform a [guide\|44409\|hard reset] after reassembly. This can prevent several issues and simplify troubleshooting.