修复你的物品 社区 商店

认识和断开线缆连接头

返回指南
英语
中文
上一步 下一步

正翻译步骤 7

步骤 7
Recognizing & Disconnecting Cable Connectors, Coaxial Connectors: 步骤 0 中的图像 1，3 Recognizing & Disconnecting Cable Connectors, Coaxial Connectors: 步骤 0 中的图像 2，3 Recognizing & Disconnecting Cable Connectors, Coaxial Connectors: 步骤 0 中的图像 3，3
Coaxial Connectors

  • Coaxial connectors like these—also called antenna, U.FL, or IPEX connectors—have a metal head that snaps over a circular socket on the board, like a metal snap button on a shirt. These connectors come in various sizes and are often used to connect Wi-Fi or cellular antenna cables.

  • To disconnect the cable, slide a thin, ESD-safe pry tool or angled tweezers under the metal neck of the connector (as close to the head as possible) and lift straight up from the board.

  • If you work with these connectors often, you may want to buy a specialized disconnect tool (small size, large size). These tools speed up the disconnect and reconnect procedures while minimizing the risk of damage.

  • When working with these connectors, it's key to always lift the head straight up. If pried on at an odd angle, you risk breaking the socket off of the board underneath.

  • Reconnecting these can be tricky. Use tweezers to hold the connector in place over its socket and gently press down with your finger or a spudger—the connector should "snap" into place. If you're having trouble, reposition the head and try again.

  • Don't try to force the connector into place or you may permanently damage it.

同轴电缆接口

对于小型同轴连接器，像这些U.FL天线电缆接口一样，使用薄的静电敏感设备安全撬刀将连接器从板上直接撬开。

要重新安装，请将接口固定在正确位置，然后将其直接按下。 将接口“夹紧”到插座中，非常像扣上夹克上的金属扣的操作。

[title] Coaxial Connectors
-[* black] For small coaxial connectors, like these U.FL antenna cable connectors, slide a thin, ESD-safe pry tool or tweezers under the wire until it's snug against the connector, and pry straight up from the board.
-[* icon_reminder] To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket.
+[* icon_note] Coaxial connectors like these—also called antenna, U.FL, or IPEX connectors—have a metal head that snaps over a circular socket on the board, like a metal snap button on a shirt. These connectors come in various sizes and are often used to connect Wi-Fi or cellular antenna cables.
+[* black] To disconnect the cable, slide a thin, ESD-safe pry tool or [product|IF145-020-5|angled tweezers|new_window=true] under the metal neck of the connector (as close to the head as possible) and ***lift straight up*** from the board.
+ [* icon_note] If you work with these connectors often, you may want to buy a specialized disconnect tool ([product|IF145-558|small size|new_window=true], [product|IF145-557|large size|new_window=true]). These tools speed up the disconnect and reconnect procedures while minimizing the risk of damage.
+ [* icon_caution] When working with these connectors, it's key to always lift the head straight up. If pried on at an odd angle, you risk breaking the socket off of the board underneath.
+[* icon_reminder] Reconnecting these can be tricky. Use tweezers to hold the connector in place over its socket and gently press down with your finger or a spudger—the connector should "snap" into place. If you're having trouble, reposition the head and try again.
+ [* icon_caution] Don't try to force the connector into place or you may permanently damage it.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。