跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Display and camera cable connectors like this one sometimes have a small metal clip running around the back of the socket to lock them in place. To separate the connector, gently push the tip of a spudger under the clip. Then, swing the clip over to the other side of the socket, so that it lays flat against the cable. Holding the clip and cable together, gently pull in the direction of the cable to remove the connector from its socket.
Display Cable Connectors
  • Display and camera cable connectors like this one sometimes have a small metal clip running around the back of the socket to lock them in place.

  • To separate the connector, gently push the tip of a spudger under the clip. Then, swing the clip over to the other side of the socket, so that it lays flat against the cable.

  • Holding the clip and cable together, gently pull in the direction of the cable to remove the connector from its socket.

像这样的显示器和摄像头电缆连接器有时会在插座背面有一个小金属夹,将其固定到位。

为了分离连接器,将夹子下方使用撬棒的尖端轻轻推入。 然后,将夹子摆动到插座的另一侧,使其平放在电缆上。

将夹子和电缆夹在一起,轻轻的向电缆方向拉动,将连接器从插座中取出。

在开源创作共享许可协议下,你的投稿已被许可