修复你的物品 社区 商店

认识和断开线缆连接头

返回指南
英语
中文
上一步 下一步

正翻译步骤 2

步骤 2
Recognizing & Disconnecting Cable Connectors, No-Fuss Ribbon Cable Connectors: 步骤 0 中的图像 1，2 Recognizing & Disconnecting Cable Connectors, No-Fuss Ribbon Cable Connectors: 步骤 0 中的图像 2，2
No-Fuss Ribbon Cable Connectors

  • You may run into a ribbon cable with a socket that looks like a ZIF connector with no flap. Usually, the cable will be more rigid and have a stiff, reinforced plastic end. These connectors are often found in larger devices such as printers, projectors, or games consoles.

  • Before trying to disconnect these cables, carefully check for a release mechanism and make sure it's not a ZIF connector. Otherwise, you may permanently damage the socket and cable by forcibly removing it.

  • Simply pull these "no-fuss" ribbon cables straight out of their socket to disconnect them.

  • To reconnect the cable, hold it as close to the end as possible and insert it back into the connector. Apply force to the plastic reinforcement rather than the cable itself.

  • Try not to kink or crease the cable.

无丝带状电缆接口

偶尔，你会发现一条丝带状电缆，你可以直接把它从它的插座拔出，并没有锁舌。

这些接头通常出现于较大的电子设备如打印机、投影仪或游戏主机，比如这台 PS5 主板。

在尝试断开连接此线缆之前，务必确认这不是带释放机制的 ZIF 连接头（上一个步骤），否则你可能会在强行拔出时损坏连接头或线缆，并且你无法重新将其插入。

若要断开连接，直接将其从插座中拔出。

若要重新连接线缆，抓住线缆接近末端的位置并将其直接插入接头中。请勿缠绕线缆。如果可以，请在塑料外壳上施力，而不是线缆本身。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。