跳转到主内容

iPhone X 电池更换

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的15指南

英语
中文

正翻译步骤 10

步骤 10
iPhone X Battery Replacement, Alternative method to unstick the battery from the case: 步骤 0 中的图像 1,2 iPhone X Battery Replacement, Alternative method to unstick the battery from the case: 步骤 0 中的图像 2,2
Alternative method to unstick the battery from the case
  • If any of the adhesive strips broke off and the battery remains stuck to the rear case, prepare an iOpener or use a hair dryer to heat the rear case directly behind the battery.

  • Heat the iPhone until the rear case is slightly too hot to comfortably touch. Don't overheat the iPhone, or you may accidentally ignite the battery.

  • Flip the iPhone back over and thread a strong piece of string (such as dental floss or a length of thin guitar string) underneath the battery.

  • Wrap the ends of the string around a cloth (or wear gloves) to protect your fingers.

  • Pull the string from side to side in a sawing motion all along the length of the battery to separate the adhesive. This can take some time since the adhesive is slow to deform, but with patience it will come free. Do not deform or damage the battery.

  • If you choose to use pry tools to lift the battery out of the iPhone, use extreme caution or you may damage the ribbon cables or the wireless charging coil directly underneath the battery.

如果任何胶条断裂导致电池无法从后盖取下,准备一个iOpener或使用电吹风来加热手机后盖电池所处的位置。

加热手机至后盖触摸起来微微烫手的程度。不要使手机过热,否则可能会导致电池爆炸。

将手机转过来,在电池下穿一根结实的细线(比如牙线或者细的吉他弦)。

使用一块布包裹住细线的末端(或者戴手套)来保护您的手指。

像锯木头一样拉动细线来分离电池下的胶条。可能胶条分离的会有些慢,但是心急吃不了热豆腐。不要损坏电池

如果您选择使用工具撬起电池,请务必小心,有可能会损坏电池排线或损坏下方的无线充电元件。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利