修复你的物品 社区 商店

iPhone X 电池更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的15指南。

返回指南
英语
中文
上一步

正翻译步骤 11

步骤 11
iPhone X Battery Replacement: 步骤 0 中的图像 1，1

  • Grasp the battery from the bottom edge and remove it from the iPhone.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Reinstall the Taptic Engine and speaker before installing a new battery. This helps keep the battery aligned correctly during installation.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery does not come with adhesive preinstalled, refer to this guide for help replacing the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

从底部边缘抓住电池，然后将其从iPhone中取出。

如果iPhone中残留有酒精溶液，请在安装新电池之前先将其擦拭干净或风干。

在安装新电池之前，请重新安装Taptic Engine和扬声器。 这有助于在安装过程中正确对齐电池。

在安装备用电池之前，请暂时将电池连接器重新连接至逻辑板插槽。 这样可以确保电池在其凹槽中正确对齐。

安装好电池，断开连接，然后继续重新组装设备。

如果你的新电池没有背胶, 参考这篇手册以获取更换背胶的方法。

重新组装后强制重启手机。这样可以避免一些问题，方便故障排除。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。