注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南。
正翻译步骤 2
步骤 2
-
Disconnect the camera cable by sliding it horizontally out of its socket.
-
If you see a small plastic retainer stuck to the logic board that prevents the camera cable from sliding out, peel it up carefully from the logic board. Apply a little heat from a hair dryer or heat gun if necessary to help soften the adhesive holding it in place. Do not attempt to forcibly disconnect the cable with the retainer in place.
-
If you still have trouble, use the point of a spudger to push at each side of the connector and "walk" it slowly from its socket.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。