Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的12指南

英语
中文

正翻译步骤 1

Step 1
Use the flat end of a spudger to pry the subwoofer/right speaker cable connector up off its socket on the logic board. Be very careful to pry under the connector as shown, and not under the socket itself. Otherwise you may accidentally separate the socket from the logic board. Be very careful to pry under the connector as shown, and not under the socket itself. Otherwise you may accidentally separate the socket from the logic board.
  • Use the flat end of a spudger to pry the subwoofer/right speaker cable connector up off its socket on the logic board.

  • Be very careful to pry under the connector as shown, and not under the socket itself. Otherwise you may accidentally separate the socket from the logic board.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可