简介

The guide instructs you to replace the spring clip or (also known as the arm clip) at the arm attachment on the Yuneec Typhoon H.

The spring clips usually get broken during a crash.

配件

无需配件。

Using a JIS #00 screwdriver, unscrew the 3mm oval screw.
  • Using a JIS #00 screwdriver, unscrew the 3mm oval screw.

    • The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out.

添加评论

For this step the arm must be bent.
  • For this step the arm must be bent.

  • Remove the broken arm clip by pinching the metal top and then pull it out with an upward force.

    • The Blunt Nose Tweezers may be helpful in removing the arm clip.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Claire Luce

于2018年04月16日注册

347 信誉积分

创作了2篇指南

团队

Cal Poly, Team S22-G3, Maness Spring 2018 Cal Poly, Team S22-G3, Maness Spring 2018 的会员

CPSU-MANESS-S18S22G3

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 11

过去的30天: 20

总计 120