Yuneec ST16S Battery Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

This simple guide describes the process of removing the battery from the Yuneec ST16S controller, either for recharging or replacement. The ST16S uses a rechargeable lithium ion 3.6 volt battery. To tell if your battery needs to be replaced, visit this troubleshooting guide.

步骤 1 Battery

Yuneec ST16S Battery Replacement, Battery: 步骤 1 中的图像 1，1

Hold down the button located above the battery while applying downward pressure to the battery.

步骤 2

Yuneec ST16S Battery Replacement: 步骤 2 中的图像 1，2

Yuneec ST16S Battery Replacement: 步骤 2 中的图像 2，2

While still holding down the button, slide the battery out of its slot.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Christian Resendes

于10/28/21注册

589 声望

创作了5篇指南

+ 2更多徽章

团队

UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021 UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021 的会员

UMASSD-GULBRANDSEN-F21S4G2

3 名成员

创作了6篇指南

0指南评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 16

总计 187