加入维修社区 - 创建账户

简介

Is the baby monitor screen in your YOTON YB02 not holding enough power to last? If so, here is a guide to access and replace the battery unit inside the monitor. There are no difficult steps but be careful when prying off the battery from the motherboard.

你所需要的

1. 步骤 1 Monitor Battery
  Use a Phillips #0 screwdriver to remove the four 7 mm screws from the back panel of the monitor.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Use a plastic opening tool to separate the back panel from the monitor.
  
  It is recommended to start from a corner, and run the tool along the edge of the panel.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 3
  With the plastic tool, pry off the monitor battery from the motherboard.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Using the plastic tool, disconnect the cables connecting the battery to the motherboard.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024