Xbox Motherboard Replacement

简介

This is the replacement guide for the motherboard in the Microsoft Xbox.

你所需要的

步骤 1 Hard Drive

Xbox Motherboard Replacement, Hard Drive: 步骤 1 中的图像 1，1

Make sure your Xbox is safely unplugged and is laying on a flat, stable surface.

翻译

步骤 2

Turn the Xbox over to reveal the four rubber feet.
Use a metal spudger to pry off the four rubber feet.

翻译

步骤 3

There are 2 more screws hidden under the two labels on the bottom of the case.
You can either remove the labels or simply feel for the screw holes through the labels and then cut or punch a hole through them.

翻译

步骤 4

Remove the six T20 Torx screws securing the top cover to the bottom cover.

翻译

步骤 5

Once the bottom and top shells are no longer attached, carefully turn the Xbox right-side-up, lift and remove the top cover.

翻译

步骤 6

Remove the three 3 mm T10 screws securing the hard drive to the Xbox.
There is one screw on the rear left side of the hard drive that is only visible when the IDE ribbon cable is lifted up. The other two are at the front right and left sides of the hard drive.
The screw on the lower left corner of the disk drive is not in the hole that it appears to be in, but rather just closer to the corner.

翻译

步骤 7

Free the hard drive power cable from the carrier for sufficient slack to lift the hard drive out.
Lift the plastic hard drive carrier out of the Xbox case.

翻译

步骤 8

Xbox Motherboard Replacement: 步骤 8 中的图像 3，3

Remove the four 3.4 mm T15 Torx screws from the plastic hard drive carrier (two screws per side).
Carefully remove the hard drive from the plastic carrier. Gentle rocking will see the hard drive come out quite easily.

翻译

步骤 9

Pull both the hard drive data ribbon cable and the power cable straight up from the hard drive.
They may be firmly seated, so be careful trying to remove them. DO NOT pull the wires as you may damage the cable assembly.

翻译

步骤 10 Disc Drive

Xbox Motherboard Replacement, Disc Drive: 步骤 10 中的图像 1，3

Xbox Motherboard Replacement, Disc Drive: 步骤 10 中的图像 2，3

Xbox Motherboard Replacement, Disc Drive: 步骤 10 中的图像 3，3

Remove the disk drive. It should come right out.
Unplug the ribbon cable and yellow cables from back of disk drive.

翻译

步骤 11

Pry back the black plastic tabs around the disk drive in order to remove it from its housing. Once removed, set the drive aside.
ONLY REMOVE IF DEAD!

翻译

步骤 12 Power Board

Xbox Motherboard Replacement, Power Board: 步骤 12 中的图像 1，1

Unplug the multi-colored power cord from the motherboard. It is in there pretty tightly, so it may take some effort.

翻译

步骤 13

Using T10 Torx screwdriver, remove two 3mm screws from the tan power supply board.
Be very careful not to touch the copper coil or capacitors on the power supply.

翻译

步骤 14

Remove the power supply and set it aside. It should lift right out.
Be very careful not to touch the copper coil or capacitors on the power supply. They may shock you.

翻译

步骤 15 Motherboard

Xbox Motherboard Replacement, Motherboard: 步骤 15 中的图像 1，2

Xbox Motherboard Replacement, Motherboard: 步骤 15 中的图像 2，2

Unplug the bundle of yellow cables as well as the rainbow cord from the motherboard.

翻译

步骤 16

Remove eleven 3mm screws from motherboard, using a T10 Torx screwdriver. Refer to the picture to find all eleven.
Unplug the power cable attached to the fan.

翻译