修复你的物品 社区 商店

Wii Balance Board Frame Replacement

简介

This guide will demonstrate how to replace the Power Supply inside the Wii Balance Board.

你所需要的

  1. Wii Balance Board Frame Replacement, Unscrewing the Foot Cover: 步骤 1 中的图像 1，1

    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

    翻译

  2. Wii Balance Board Frame Replacement, Removing the Foot Cover: 步骤 2 中的图像 1，1

    • Remove the gray plastic ring from the actual foot by lifting it up.

    翻译

  3. Wii Balance Board Frame Replacement, Removing the Foot: 步骤 3 中的图像 1，1

    • Separate the loose foot from the device by lifting it up.

    翻译

  4. Wii Balance Board Frame Replacement, Removing the Additional Feet: 步骤 4 中的图像 1，1

    • Repeat steps two and three on the remaining four feet.

    翻译

  6. Wii Balance Board Frame Replacement, Unscrewing the Back Cover: 步骤 5 中的图像 1，1

    • Unscrew the ten 12.7 mm Phillips #1 screws.

    翻译

  7. Wii Balance Board Frame Replacement, Removing the Back Cover: 步骤 6 中的图像 1，1

    • Lift off the gray back cover.

    翻译

  8. Wii Balance Board Frame Replacement, Battery Compartment: 步骤 7 中的图像 1，2 Wii Balance Board Frame Replacement, Battery Compartment: 步骤 7 中的图像 2，2

    • Locate the gray battery compartment.

    • Push the tab on the bottom and lift up completely to remove the cover to the batteries.

    翻译

  9. Wii Balance Board Frame Replacement, Removing the Battery Case: 步骤 8 中的图像 1，1

    • Unscrew the two 6.35 mm Phillips #1 screws.

    • Slide the battery case out.

    翻译

  10. Wii Balance Board Frame Replacement, Unscrewing the Frame: 步骤 9 中的图像 1，1

    • Unscrew the four 12.7 mm #1 screws.

    翻译

  11. Wii Balance Board Frame Replacement, Removing the Frame: 步骤 10 中的图像 1，1

    • Lift the frame, circuit board, and power supply out of the front case. These components are all connected.

    翻译

  12. Wii Balance Board Frame Replacement, Removing the Power Supply: 步骤 11 中的图像 1，1

    • Lift out the power supply. It is not screwed in.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Cory Olson

于09/29/14注册

891 声望

创作了4篇指南

徽章: 16

+ 13更多徽章

团队

Cal Poly, Team 13-8, Forte Fall 2014 Cal Poly, Team 13-8, Forte Fall 2014 的会员

CPSU-FORTE-F14S13G8

5 名成员

创作了15篇指南

一条评论

Top Anleitung, aber wo kann ich die Platine herbekommen? Danke!!!

Dominik - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 41

总计 2,905