修复你的物品 社区 商店

Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement

简介

Follow this guide to remove the drive belt for the Wacker Compactor Plate VP1550AW 2014.

你所需要的

  1. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: 步骤 1 中的图像 1，2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: 步骤 1 中的图像 2，2

    • Before you begin, be sure that the engine is powered off and is cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    翻译

  2. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Loosen the belt guard: 步骤 2 中的图像 1，1

    • Use a 1/2" socket and wrench to loosen the two bolts securing the belt guard.

    • The bolts are captive and should not be removed.

    翻译

  4. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: 步骤 3 中的图像 1，2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: 步骤 3 中的图像 2，2

    • Remove the belt guard.

    翻译

  5. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: 步骤 4 中的图像 1，3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: 步骤 4 中的图像 2，3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: 步骤 4 中的图像 3，3

    • Use scissors or a blade to cut the drive belt.

    • Remove the drive belt.

    翻译

  6. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Install a replacement belt: 步骤 5 中的图像 1，1

    • Loop the replacement belt onto the small pulley.

    翻译

  7. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: 步骤 6 中的图像 1，3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: 步骤 6 中的图像 2，3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: 步骤 6 中的图像 3，3

    • Replacing the belt poses a substantial pinching hazard. Wear safety gloves and be mindful where you position your fingers.

    • Guide the belt over the top of the clutch pulley.

    • Loop the belt underneath the pulley axle.

    • Rotate the pulley slowly and guide the built into the groove.

    • Getting the replacement belt back onto the drive pulley requires considerable strength.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Arthur Shi

于01/03/18注册

254,555 声望

创作了529篇指南

徽章: 47

+ 44更多徽章

团队

iFixit iFixit 的会员

Staff

136 名成员

创作了17,420篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 9

过去 30 天： 35

总计 3,028