修复你的物品 社区 商店

VTech Kidizoom Camera Connect Shutter Button Replacement

简介

Use this guide to remove and replace the button and circuit board used for taking photos

你所需要的

  1. VTech Kidizoom Camera Connect Shutter Button Replacement, Front Case: 步骤 1 中的图像 1，2 VTech Kidizoom Camera Connect Shutter Button Replacement, Front Case: 步骤 1 中的图像 2，2

    • Remove batteries and SD card before beginning disassembly!

    • Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.

    编辑

  2. VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 2 中的图像 1，2 VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 2 中的图像 2，2

    • Remove all four (11mm) screws with the Philips #0 screwdriver.

    编辑

  3. VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 3 中的图像 1，3 VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 3 中的图像 2，3 VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 3 中的图像 3，3

    • Remove the two battery cartridges located on the underside of the camera.

    • Once cartridges are removed, use the metal spudger to pry open the top, bottom, and both sides of the camera.

    编辑

  5. VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 4 中的图像 1，1

    • Beware of the two black viewfinder lens falling out as you pry open the device!

    • The device should now be open and ready for further repair and/or replacement parts.

    编辑

  6. VTech Kidizoom Camera Connect Shutter Button Replacement, Shutter Button: 步骤 5 中的图像 1，1

    • Remove the purple plastic that covers the button and circuit board. It should slide right out from the slot it sits in.

    编辑

  7. VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 6 中的图像 1，1

    • Unsolder wires connected to the right side of the circuit board. Pull the wires to the side.

    编辑

  8. VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 7 中的图像 1，2 VTech Kidizoom Camera Connect Shutter Button Replacement: 步骤 7 中的图像 2，2

    • The button/circuit board should be loose now. Gently pull out the button/circuit board to remove it from the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Justin Sanchez

于02/08/16注册

520 声望

创作了4篇指南

徽章: 11

+ 8更多徽章

团队

USF Tampa, Team 6-4, Eyestone Spring 2016 USF Tampa, Team 6-4, Eyestone Spring 2016 的会员

USFT-EYESTONE-S16S6G4

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 16

总计 880