简介

Follow this guide to properly replace the keyboard.

Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.
  • Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.

添加评论

Remove the battery.
  • Remove the battery.

添加评论

  • Identify the antenna. It is the extendable plastic component pictured here.

添加评论

  • Twist the base in a counter-clockwise motion to unscrew the antenna.

添加评论

  • The antenna should slide right out of the phone when finished.

添加评论

  • Remove the small rubber grommet using a plastic opening tool as shown.

添加评论

  • Unscrew all five of the highlighted screws using a Phillips #00 Screwdriver.

添加评论

  • Use a plastic opening tool to separate the two pieces that form the outer case of the phone.

  • Caution: prying the two pieces apart may be difficult.

添加评论

  • Remove the posterior piece of the outer case.

添加评论

  • Remove the speaker using a plastic opening tool.

添加评论

  • Remove the wire attached to the speaker from the logic board using tweezers.

添加评论

  • Detach the highlighted piece from the logic board using a plastic opening tool.

添加评论

  • Remove the logic board from the anterior piece of the outer case using the plastic opening tool.

添加评论

  • Remove the keyboard.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Bryon Hazlewood

于2012年10月03日注册

1 信誉积分

创作了4篇指南

团队

Cal Poly, Team 24-26, Regan Fall 2012 Cal Poly, Team 24-26, Regan Fall 2012 的会员

CPSU-REGAN-F12S24G26

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 266