简介

This is a repair guide for battery replacement.

To reach the battery, follow steps 1 through 3 in the Tungsten E Teardown

添加评论

Begin to pry up the battery.  It is fastened to the mother board using two sided tape.
  • Begin to pry up the battery. It is fastened to the mother board using two sided tape.

  • Caution: the battery is connected by two wires.

添加评论

Remove the battery
  • Remove the battery

  • Caution: Be careful not to tear the wires when removing battery.

添加评论

Using a soldering iron, disconnect the battery wires.
  • Using a soldering iron, disconnect the battery wires.

  • Note: the wires are soldered to the board.

添加评论

Take replacement battery and solder the wires to the board.
  • Take replacement battery and solder the wires to the board.

  • Take care to match wire colors as before.

  • Use double sided tape to attach battery firmly to board.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Kathleen Hix

于2010年01月21日注册

49 信誉积分

创作了2篇指南

团队

Cal Poly, Team 13-22, Maness Winter 2010 Cal Poly, Team 13-22, Maness Winter 2010 的会员

CPSU-MANESS-W10S13G22

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 16

总计 5,638