加入维修社区 - 创建账户

简介

This guide should not be too difficult, as there isn't really a need to use any soldering/desoldering tools to take apart anything. You will have to still be careful about some of the cables within the device though.

你所需要的

1. 步骤 1 Back Cover
  Remove the two Phillips #00 screws on the side of the tablet.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Take one of the plastic opening tools and wedge it in the middle of the tablet, starting on the USB Port side.
  
  Holding the tool in place, take one of the 6 plastic opening picks and slide it across the opening you made with the opening tool.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 3
  Continue going around the tablet sides with the plastic pick, being sure that you are maintaining the openings you made with either your hand or the opening tool.
  
  You will notice some popping as you go around with the pick. Don't worry, this is completely normal.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Remove the back cover of the tablet to reveal the internals.
  
  To replace, pinch each of the ends together until all four sides are closed.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 5 Camera
  Slowly remove the two pieces of electrical tape holding down the Camera ribbon cable.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 6
  Remove the #00 Screw holding down the Camera mount, then remove the Camera mount.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 7
  Detach the Camera's ribbon cable from the Motherboard using your fingernail or a plastic opening tool.
  
  Remove the camera from the frame and replace as needed.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024