危险
有潜在危险
如果不正确地执行这个步骤,就可能导致受伤。请保持谨慎并注意所有警告。
危险

简介

When your brakes get worn down, they need to be replaced. This will help keep you safe as you ride.

配件

无需配件。

  1. Note: In this repair guide the pictures are taken with the tire removed so that it is easier to follow our steps. However, removing the tire is not necessary to replace the brake pads.
    • Note: In this repair guide the pictures are taken with the tire removed so that it is easier to follow our steps. However, removing the tire is not necessary to replace the brake pads.

    • Unscrew the brake pad cap with a T25 screwdriver bit.

    添加评论

  2. Grab and pull out the spring between the brake pads.
    • Grab and pull out the spring between the brake pads.

    添加评论

    • Slide out the back brake pad first. Then slide out the front brake pad.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Slide in the new brake pads with the first going in the front.

    添加评论

    • Then slide in the other pad in the back.

    • Make sure each brake pad is facing the right way.

    添加评论

    • Push the spring back into place between the two brake pads so the spring is visible in the hole shown here.

    添加评论

    • Screw the brake pad cap back on.

    添加评论

    • Adjust the red knob as necessary (directions are noted on the knob).

    添加评论

结论

Now your bike should actually be able to stop.

Ben Hartinger

于2014年01月27日注册

340 信誉积分

创作了3篇指南

团队

Cal Poly, Team 1-37, Maness Winter 2014 Cal Poly, Team 1-37, Maness Winter 2014 的会员

CPSU-MANESS-W14S1G37

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 279