跳转到主内容

简介

We are going to teach you how to disassemble your Master Prep.

配件

没有特定配件。

  1. Place the blender to the side.
    • Place the blender to the side.

  2. Remove the two highlighted screws with a Phillips #2 Screw Driver Gently pull off the top.
    • Remove the two highlighted screws with a Phillips #2 Screw Driver

    • Gently pull off the top.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Kamal Taha

于2015年08月27日注册

667 信誉积分

创作了5篇指南

团队

USF Tampa, Team 1-3, Sullivan Fall 2015 USF Tampa, Team 1-3, Sullivan Fall 2015 的会员

USFT-SULLIVAN-F15S1G3

3 名成员

创作了5篇指南

一条评论

My unit has something other than Phillips screws holding the top together. It appears to be an Allen head, not a torx, closest fit was a 2mm Allen wrench but that was still too small. What head could this be?

Keith Johnson - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 13

过去的30天: 27

总计 2,477