简介
In our this guide, we will demonstrate how to replace the battery for the SONY RM-LVR1. This procedure consists of 3 simple steps. For optimal performance, fully charge the newly installed battery before use.
你所需要的
-
-
-
Use a Phillips #00 screwdriver to remove the four (4) screws on the back of the device.
-
If the screws strips or is previously stripped, refer to the stripped screw repair guide.
询问修复机器人
-
-
-
To reassemble your device, follow these instructions in reverse order.
3等其他人完成本指南。
团队
Eastern Washington University, Team S2-G2, Crane Fall 2017 Eastern Washington University, Team S2-G2, Crane Fall 2017 的会员
EWU-CRANE-F17S2G2
3 名成员
创作了6篇指南
