Sony BDP-BX620 Bluetooth Module Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

This guide will show you how to remove the Bluetooth module which controls the Bluetooth functions of the device.

你所需要的

1. 步骤 1 Outer Cover
  Power on the device, eject the disk tray, and power off the device.
  
  Turn the device over.
  
  Lightly apply downward pressure on the black covering on the disk tray until it comes off.
  
  Caution, applying too much pressure can break the black covering.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Turn the device around.
  
  Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.
  
  Slide the side covers on either side towards the back of the device.
  
  There is a back cover on either side of the device.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 3
  This step might require someone to help unclasping the plastic clips.
  
  Turn the device so that the bottom is facing up.
  
  In the bottom, unclip the three plastic clips circled in red.
  
  On either side, unclip the plastic clip circled in red
  
  Slide the black covering forwards to remove.
  
  All five clips have to be unclasped for the covering to be removed.
  
  Careful not to break the plastic clips when putting it back on.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 4 Port Board
  Now, spot the large ribbon cable that connects between the motherboard and the port board.
  
  Remove the cable by pulling upwards.
  
  Be careful when pulling upwards on the ribbon cable. Too much force can cause it to rip.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 5
  Use your Phillips screwdriver to take out the silver screw holding in the port board.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 6
  在这个步骤中使用的工具：
  Tweezers
  $4.99
  
  购买
  Now use the tweezers to unclip the portboard on the side.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 7 Bluetooth Module
  Now, pull the small ribbon cable that connects between the motherboard and the Bluetooth module.
  
  Be careful to not pull too hard or the ribbon cable will rip.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 8
  Use your Phillips screwdriver to remove the silver screw holding the Bluetooth module in place.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 9
  Lift to remove the bluetooth module from the device.
  
  To prevent damage, always hold it on the sides.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024

结论

To reassemble your device, follow these instructions in reverse order.

取消：我没有完成这个指南。

作者

与2其他贡献者

Zachery Zavala

于10/05/16注册

175 声望

创作了2篇指南

+ 4更多徽章

团队

USF Tampa, Team 1-6, Lacy Fall 2016 USF Tampa, Team 1-6, Lacy Fall 2016 的会员

USFT-LACY-F16S1G6

4 名成员

创作了18篇指南

0指南评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 13

过去 30 天： 35

总计 568