简介

You will take the camera apart in order to replace the damaged LCD screen and restore functionality.

配件

无需配件。

Remove all screws along the edges of the camera, using a #00 Phillips screwdriver. Remove all screws along the edges of the camera, using a #00 Phillips screwdriver.
  • Remove all screws along the edges of the camera, using a #00 Phillips screwdriver.

添加评论

Slide open the battery  compartment cover before removing the exterior covers of the camera.
  • Slide open the battery compartment cover before removing the exterior covers of the camera.

添加评论

Carefully pull the back case (the side showing the  LCD screen) away from the front half. There are clips securing the top of the back case. Do not be afraid to use the proper amount of force to remove the back case. Turn the camera around to the front (the lens side). Carefully remove the front case.
  • Carefully pull the back case (the side showing the LCD screen) away from the front half.

  • There are clips securing the top of the back case. Do not be afraid to use the proper amount of force to remove the back case.

  • Turn the camera around to the front (the lens side). Carefully remove the front case.

  • There are also clips on the lens' side as well, so do not be afraid to use force.

添加评论

Position the camera so the LCD screen is facing you. Remove the LCD screen from the screen plate.
  • Position the camera so the LCD screen is facing you.

  • Remove the LCD screen from the screen plate.

  • Replace the broken LCD screen with the functioning LCD screen.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Kando Ogunrinola

于2010年04月17日注册

167 信誉积分

创作了3篇指南

团队

Cal Poly, Team 33-72, Johann Spring 2010 Cal Poly, Team 33-72, Johann Spring 2010 的会员

CPSU-JOHANN-S10S33G72

4 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 7

总计 8,189