修复你的物品 社区 商店

Samsung Galaxy Watch Motherboard Replacement

简介

Use this guide to replace the motherboard in a Samsung Galaxy Watch.

你所需要的

  1. Samsung Galaxy Watch Motherboard Replacement, Opening Procedure: 步骤 1 中的图像 1，1

    • Remove the four Tri-point #00 screws (4.2 mm length) on the backside of the watch.

    编辑

  2. Samsung Galaxy Watch Motherboard Replacement: 步骤 2 中的图像 1，2 Samsung Galaxy Watch Motherboard Replacement: 步骤 2 中的图像 2，2

    • Use an opening tool to get between the back cover and the metal housing of the watch.

    • Carefully pry the plastic back cover open.

    • Don't remove the back cover yet. There is a flex cable running to the core assembly inside.

    编辑

  3. Samsung Galaxy Watch Motherboard Replacement: 步骤 3 中的图像 1，2 Samsung Galaxy Watch Motherboard Replacement: 步骤 3 中的图像 2，2

    • Lay down the watch and lift the back cover to access the sensor connector on the motherboard.

    编辑

  4. Samsung Galaxy Watch Motherboard Replacement: 步骤 4 中的图像 1，2 Samsung Galaxy Watch Motherboard Replacement: 步骤 4 中的图像 2，2

    • Use a spudger to disconnect the sensor flex cable from the motherboard.

    编辑

  6. Samsung Galaxy Watch Motherboard Replacement: 步骤 5 中的图像 1，3 Samsung Galaxy Watch Motherboard Replacement: 步骤 5 中的图像 2，3 Samsung Galaxy Watch Motherboard Replacement: 步骤 5 中的图像 3，3

    • Remove the back cover.

    • When closing the watch make sure the rubber gasket is undamaged or replace it with a new one.

    编辑

  7. Samsung Galaxy Watch Motherboard Replacement, Core Assembly Removal: 步骤 6 中的图像 1，2 Samsung Galaxy Watch Motherboard Replacement, Core Assembly Removal: 步骤 6 中的图像 2，2

    • Use a spudger to disconnect the display flex cable from the motherboard.

    编辑

  8. Samsung Galaxy Watch Motherboard Replacement: 步骤 7 中的图像 1，2 Samsung Galaxy Watch Motherboard Replacement: 步骤 7 中的图像 2，2

    • Lift the core unit out of the housing.

    • The core's plastic frame sits tight inside the housing.

    • Carefully thread the display flex cable through the gap of the core's plastic frame.

    编辑

  9. Samsung Galaxy Watch Motherboard Replacement, Motherboard: 步骤 8 中的图像 1，2 Samsung Galaxy Watch Motherboard Replacement, Motherboard: 步骤 8 中的图像 2，2

    • Use a spudger to disconnect the hall sensor flex cable.

    编辑

  10. Samsung Galaxy Watch Motherboard Replacement: 步骤 9 中的图像 1，3 Samsung Galaxy Watch Motherboard Replacement: 步骤 9 中的图像 2，3 Samsung Galaxy Watch Motherboard Replacement: 步骤 9 中的图像 3，3

    • Use a pair of tweezers to gently peel both button cables from the plastic frame.

    • The button cables have metal plates behind them. These plates should remain on the cables.

    编辑

  11. Samsung Galaxy Watch Motherboard Replacement: 步骤 10 中的图像 1，1

    • Remove the single Phillips #00 screw (3.4 mm length).

    编辑

  12. Samsung Galaxy Watch Motherboard Replacement: 步骤 11 中的图像 1，3 Samsung Galaxy Watch Motherboard Replacement: 步骤 11 中的图像 2，3 Samsung Galaxy Watch Motherboard Replacement: 步骤 11 中的图像 3，3

    • Insert a spudger into the small gap underneath the motherboard where the cutout in the plastic frame is.

    • Lift the motherboard by twisting the spudger.

    • Slide the motherboard out from under the plastic tab.

    编辑

  13. Samsung Galaxy Watch Motherboard Replacement: 步骤 12 中的图像 1，1

    • Remove the motherboard.

    编辑
结论

If possible, turn on your device and test your repair before resealing.

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Take your e-waste to an R2 or e-Stewards certified recycler.

7等其他人完成本指南。

作者

与3其他贡献者

Tobias Isakeit

于03/31/14注册

117,296 声望

创作了188篇指南

徽章: 46

+ 43更多徽章

团队

Master Techs Master Techs 的会员

Community

322 名成员

创作了2,521篇指南

7条评论

Anyone know where to purchase a Galaxy Watch mother board?

lorne serpa - 回复

What is the part number, or where can you get the motherboard?

Nick Henthorn - 回复

Where can the motherboard be purchased from for Galaxy Watch ?

Mohammed Aamir - 回复

I got a motherboard on ebay. Including import duties it was something like 90$. Shipped to Denmark.

Definitely cheaper than repair shop and absolutely more fun! :)

Agris Jurjans - 回复

Hello,

Do you know if switching a motherboard from a GW46 Bluetooth only (R800) to a GW46 LTE (R805) is a straight swap or additional parts are needed?

As my R800 sensors are dead and i need to replace the motherboard and the back cover anyway.

Thanks

BRazvy - 回复

添加评论

浏览统计数据:

过去 24 小时： 5

过去 7 天： 24

过去 30 天： 137

总计 11,774