简介
Use this guide to replace a cracked or broken screen on your Galaxy Watch.
你所需要的
-
-
Remove the four Tri-point #00 screws (4.2 mm length) on the backside of the watch.
-
-
-
-
Use a spudger to disconnect the display flex cable from the motherboard.
-
-
-
If necessary apply some tape over the display to avoid any injury from glass shards.
-
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
8等其他人完成本指南。