Samsung CLP-300 Imaging Unit Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

Follow these easy steps to replace the imaging unit in your Samsung CLP-300.

步骤 1 Imaging Unit

Samsung CLP-300 Imaging Unit Replacement, Imaging Unit: 步骤 1 中的图像 1，1

Turn the printer off and wait a few minutes for it to cool.

步骤 2

Samsung CLP-300 Imaging Unit Replacement: 步骤 2 中的图像 1，2

Samsung CLP-300 Imaging Unit Replacement: 步骤 2 中的图像 2，2

Open the front cover

步骤 3

Samsung CLP-300 Imaging Unit Replacement: 步骤 3 中的图像 1，1

Remove waste toner container from the printer.

步骤 4

Samsung CLP-300 Imaging Unit Replacement: 步骤 4 中的图像 1，3

Samsung CLP-300 Imaging Unit Replacement: 步骤 4 中的图像 2，3

Samsung CLP-300 Imaging Unit Replacement: 步骤 4 中的图像 3，3

Pull the imaging unit out of the printer using bottom handle.
Use green handle on top of imaging unit to steady unit as you pull it out.
Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”
Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit
Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.
If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与3其他贡献者

Heather Howard

于10/15/14注册

586 声望

创作了4篇指南

+ 5更多徽章

团队

University of Maine, Team 1-1, Diaz Fall 2014 University of Maine, Team 1-1, Diaz Fall 2014 的会员

UMAINE-DIAZ-F14S1G1

3 名成员

创作了8篇指南

0指南评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 62

总计 13,938