Roborock S5 Omnidirectional Wheel Assembly Replacement

加入维修社区 - 创建账户

简介

This guide will go over the steps necessary to replace the omnidirectional wheel assembly at the front of the Roborock S5. Replacing this wheel assembly is sometimes necessary when there is an excess buildup of dirt, hair, and other fibrous debris that interferes with the wheel's ability to spin freely. In other cases, the wheel assembly can become damaged and need to be replaced entirely.

Before you begin the repair, make sure to turn off the device.

你所需要的

1. 步骤 1 Omnidirectional Wheel Assembly
  Power down your Roborock S5 vacuum.
  
  Place it upside down with the omnidirectional wheel facing you.
  
  Grab the wheel with your thumb and index finger and pull up.
  
  The wheel assembly should pop out fairly easily and without too much force.
  
  Remove any debris before replacing the wheel.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024