跳转到主内容

简介

In order to restring your puppet, you will need:

  • Fishing line
  • Scissors
  • A sewing needle
  • Tape or glue
  • Two equally sized wooden sticks (such as chopsticks or pencils)

Note: The glue, tape, and sticks are only needed if you are restoring a handle, also.

  1. Detach the severed/damaged strings. This can be done by cutting them or carefully pulling them out.
    • Detach the severed/damaged strings. This can be done by cutting them or carefully pulling them out.

  2. Thread the fishing line through the needle as you would with thread and tie a simple knot to secure the fishing line.
    • Thread the fishing line through the needle as you would with thread and tie a simple knot to secure the fishing line.

    • Note: Tying the knot can be tedious, so it may take a few tries.

  3. Insert the needle into a secure part of the puppet's feet or other necessary puppet part.
    • Insert the needle into a secure part of the puppet's feet or other necessary puppet part.

    • Note: The material may resist the needle at first.

  4. Pull the needle through the puppet part and tie another simple knot directly onto the location that was threaded through. Note: You may want to tie a few simple knots for extra security.
    • Pull the needle through the puppet part and tie another simple knot directly onto the location that was threaded through.

    • Note: You may want to tie a few simple knots for extra security.

  5. If you need to make a handle, take the two wooden sticks and cross them to where they are perpendicular to each other.
    • If you need to make a handle, take the two wooden sticks and cross them to where they are perpendicular to each other.

  6. Secure the two sticks with tape or glue where the two sticks cross.
    • Secure the two sticks with tape or glue where the two sticks cross.

    • Note: Tape is a faster fix, but may appear messier.

  7. Tie a knot around the stick handle to secure the fishing line. (it may take several knots to secure the fishing line and you can adjust the length as needed with scissors)
    • Tie a knot around the stick handle to secure the fishing line. (it may take several knots to secure the fishing line and you can adjust the length as needed with scissors)

    • Note: Repeat the previous steps to other parts of the puppet if necessary.

  8. This is what your puppet should look like.
    • This is what your puppet should look like.

    • Happy puppet-ing!

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Stephanie Gummelt

于2015年10月27日注册

131 信誉积分

撰写一个指南

团队

Missouri Western, Team 1-4, Adkins Fall 2015 Missouri Western, Team 1-4, Adkins Fall 2015 的会员

MWSU-ADKINS-F15S1G4

2 名成员

创作了1篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 2

过去的30天: 33

总计 1,258