简介

This guide will lead you through the steps necessary to access the screen's components as well as how to assure it is properly connected.

配件

无需配件。

  1. Flip the device over
    • Flip the device over

  2. Unscrew the 2 screws closest to the screen
    • Unscrew the 2 screws closest to the screen

  3. Flip the device back over
    • Flip the device back over

    • It is now standing right side up

  4. Unscrew the top.
    • Unscrew the top.

  5. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  6. Take the top of the device off.
    • Take the top of the device off.

  7. Unscrew the button board.
    • Unscrew the button board.

  8. Take off the button board.
    • Take off the button board.

  9. Unscrew all visible screws on the black logic board cover.
    • Unscrew all visible screws on the black logic board cover.

  10. Lift the screen straight up out of the device.
    • Lift the screen straight up out of the device.

  11. Check that the single input plug from the logic board  to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.
    • Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.

    • Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.

    • You have successfully reconnected your display screen.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Nick Sherman

于2012年09月26日注册

31 信誉积分

撰写一个指南

团队

Cal Poly, Team 7-50, Forte Fall 2012 Cal Poly, Team 7-50, Forte Fall 2012 的会员

CPSU-FORTE-F12S7G50

5 名成员

创作了8篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 348