Protocol Kaptur GPS Virtual Reality Lens Replacement - iFixit 维修指南

简介

This guide will help you replace your lens if they get scratched or broken.

你所需要的

步骤 1 Virtual Reality Lens

Protocol Kaptur GPS Virtual Reality Lens Replacement, Virtual Reality Lens: 步骤 1 中的图像 1，3

Protocol Kaptur GPS Virtual Reality Lens Replacement, Virtual Reality Lens: 步骤 1 中的图像 2，3

Protocol Kaptur GPS Virtual Reality Lens Replacement, Virtual Reality Lens: 步骤 1 中的图像 3，3

Remove the phone slide from the virtual reality lens.
Take the outside cover off using a plastic opening tool.

步骤 2

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 2 中的图像 1，3

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 2 中的图像 2，3

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 2 中的图像 3，3

Remove each screw from its place.
Four screws will be 6mm Phillips head.
Twelve screws will be 7mm Phillips head.
Pull each bracket out so you can see the full lens case.

步骤 3

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 3 中的图像 1，3

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 3 中的图像 2，3

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 3 中的图像 3，3

You will need to remove the adjustable lens lever on top of the virtual reality lens.
Using a tweezers, you will need to separate the tooth gears and remove them so the lens can fall freely out.
Pull the lens case out from the front of the headset.

步骤 4

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 4 中的图像 1，2

Protocol Kaptur GPS Virtual Reality Lens Replacement: 步骤 4 中的图像 2，2

To get the actual lens out, you will need to push the lens from the outside in with a little force to break the lens out of it's case.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Austin Fedie

于02/15/18注册

168 声望

撰写一个指南

团队

UW Stout, Team S8-G6, Ogden Spring 2018 UW Stout, Team S8-G6, Ogden Spring 2018 的会员

UWSTOUT-OGDEN-S18S8G6

3 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 4

总计 286