简介

This guide will show where to find the battery and how to replace it. If the drone does not have power or the battery is damaged, use this guide to help you.

The battery is accessible through the back of the drone.
  • The battery is accessible through the back of the drone.

  • Press the tabs on both sides of the white stripe to pull the battery out.

添加评论

Now that the battery is out, remove the screws starting with the four smaller ones on the top part of the battery. After this, remove the last four on the side. Make sure to keep track of where each screw came from.
  • Now that the battery is out, remove the screws starting with the four smaller ones on the top part of the battery. After this, remove the last four on the side. Make sure to keep track of where each screw came from.

  • There should be one 7 mm Phillips head screw, three 6 mm Phillips head screws, and four 5 mm Phillips head screws.

  • There is another screw that is located where the arrow is pointed. You will need to take the other screws out first before you can get to this one.

添加评论

  • Remove the top piece, and gently pry the two halves apart. Divide the sticker if necessary.

添加评论

  • The battery is now removable from its container.

  • During reassembly, make sure the outlet is returned to its holder and faces the correct direction.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Connor Woitte

于2018年02月15日注册

537 信誉积分

创作了3篇指南

团队

UW Stout, Team S8-G6, Ogden Spring 2018 UW Stout, Team S8-G6, Ogden Spring 2018 的会员

UWSTOUT-OGDEN-S18S8G6

3 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 8

总计 80