-
-
Make sure the power cord is attached properly.
-
The power cord connects to the printer on the back of the device.
-
When looking at the rear of the printer, the outlet will be in the lower right corner.
-
Ensure the other end of the power cord is firmly plugged into an outlet.
询问修复机器人
-
-
结论
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。
团队
Michigan Tech, Team 1-5, Lauer Fall 2014 Michigan Tech, Team 1-5, Lauer Fall 2014 的会员
MTU-LAUER-F14S1G5
3 名成员
创作了5篇指南
