简介

Two RAM slots allow up to 1 GB of PC133 RAM.

Remove the battery.
  • Remove the battery.

  • Turn the keyboard locking screw so that it is parallel to the space bar.

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

添加评论

Rest the keyboard face down on the trackpad area.
  • Rest the keyboard face down on the trackpad area.

  • Disconnect the keyboard connector from the logic board.

添加评论

Your laptop should look approximately like this.
  • Your laptop should look approximately like this.

添加评论

Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to ÒpopÓ up.
  • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to ÒpopÓ up.

  • Pull the RAM chip out.

  • Repeat this process if a second RAM chip is installed.

Don't forget to spread the brackets on the sides apart to release the chips.

Calion - 回复

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

附加文件

iRobot

于2009年09月24日注册

1 信誉积分

创作了774篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 6,559